Three effective methods! Removing weeds and moss in the brick joints of a small yard

Weeds in the yard are really annoying. A friend laid red bricks in the design of a small yard, which is very beautiful. , The vitality of the grass is still very strong, pull it out very helplessly and grow back. A friend suggested using a high pressure water gun to flush the ground and remove the weeds at the same time, but the good times still do not grow and the grass still comes out. What should I do?

Method 1: three natural substances mixed with water

Place + 1 part salt + 1 part dish soap + 10 parts white vinegar + the appropriate amount of water in a pressure shower. After shaking and stirring evenly, spray it on the weeds with a watering can. Under the sun, the weeds will wither the next day, and the effect will be very noticeable. It can not only remove weeds, but also remove moss from brick joints.

But this method can only be used in small amounts and low frequency, and it cannot be used on land because vinegar and salt are bad for the soil. And do not touch other plants during use, and also do not harm them.

Method 2: use boiling water

Washing weeds and moss with boiled water can remove weeds, but requires constant watering, which is a hassle.

Method 3: manual cleaning + plastic sand

First, with a small shovel, clean out the weeds and moss in the seams of the brick, including the earth in the seams of the brick. broom to sweep all the mortar into the gap, and finally use the water spray nozzle, the effect is the best, it is very clean, and the environment suitable for weeds in the brick joints has been cleared, so weeds are not easy to grow.