The technical purpose of this utility model is mainly to solve the dual-use forging and brazing machine with the following technical solutions, including the electric controller, hydraulic device, oil pump and motor to drive the hydraulic device, and the oil pump is connected and forced through the oil pipe. The extrusion device, the compression molding device is equipped with a forming device, it is characterized in that the upper mold and lower mold on the forming device are symmetrical, and the lower mold is provided with a vertical groove in the middle and a vertical groove with a vertical groove. Vertical groove is a horizontal groove , one end of the vertical groove is a trapezoidal vertical groove, and the other end adjacent to it is a semicircular trapezoidal vertical groove, the two ends of the horizontal groove are trapezoidal horizontal grooves with steps, and the middle passes through a semicircular horizontal groove with a connection groove. The longitudinal groove and the transverse groove are cross-shaped, and the intersection of the trapezoidal longitudinal groove and the semicircular transverse groove is a semicircular groove. By combining the lower mold and the upper mold, grooves are formed in them according to the shape of the drill rod to be forged or soldered, the electric controller controls some actions of the equipment, there are buttons to control various actions, such as pressing the "Forward" and "Retreat" buttons of the extrusion device, as well as automatic and manual switching.
With this forming device, a dual-purpose machine for forging, soldering and brazing is realized
A dual purpose machine is realized with this molding device. When the forging function is required, the drill rod is placed in the longitudinal slot for pressing. If a soldering function is required, the drill rod is placed in a horizontal slot. for pressing. Realization, the shape of the longitudinal and transverse grooves is consistent with the shape of the drill rod that actually needs to be pressed, and because the dual-purpose machine is implemented using oil pump-driven hydraulic pressure and electrical control, the dual target machine can be disassembled and assembled, and it is very convenient to use. Its own design, simplicity makes the weight relatively light, and because it is detachable, it is very convenient to move, and the power only needs 4KW to realize the function of forging and soldering. As a preference
The mold device described in
is located on the base of the machine, and a guide post is provided on the base of the machine, and a chute is provided on both sides of the upper and lower mold, and the chute is connected to the guide post. The hydraulic device drives the piston compression device connected with the connecting flange, and drives the upper and lower molds of the forming device to move up and down the guide post, and the guide post is fixed on the base of the machine, which prevents the mold device from moving and increases stability. Preferably, the upper side of the forming device is connected to the compression piston device through a connecting flange, and the compression piston device is connected to the oil pump through an oil pipeline. This pressure piston device uses an oil pump to drive a hydraulic device to control the up and down movement of the forming device. Preferably, the adjacent side of the mold provided with a chute is connected to the extrusion piston device via an extrusion block, and the extrusion piston device is connected to the oil pump via an oil line.
Easy to operate and easy to move