Hardware classification
Specific classification and characteristics of various hardware tools Hand tools Hand tools are divided into screwdrivers, wrenches, hammers, tape measures, wallpaper knives, electrical knives, hacksaws, etc.
Power tools01
Refers to a tool that is held and operated by hand, powered by a low-power motor or electromagnet, and driven by a transmission mechanism to drive the working head.
1. Electric drill: A tool used for drilling metal materials, plastics, etc. When equipped with forward and reverse switches and electronic speed control devices, it can be used as an electric screwdriver. Some models come with a rechargeable battery.
2. Electric hammer: used for drilling masonry, concrete, artificial or natural stone, etc., and the functions of electric drills are interchangeable. SDS-PLUS chucks and drills are widely used for light drills, and SDS-MAX chucks and drills are used for medium and heavy rock drills, and the chisels can be clamped.
3. Impact Drill: An electric tool primarily used for drilling hard materials such as masonry and concrete. When the impact mechanism is closed, it can also be used as a conventional electric drill.
4. Grinder: A tool for grinding with a grinding wheel or grinding wheel, used for grinding wood. There are straight electric grinders and electric angle grinders. Sandpaper required.
5. Curve Saw: Mainly used for cutting steel, wood, plastic and other materials, the saw blade reciprocates or swings up and down and is most suitable for cutting precise straight lines or curves.
6. Angle grinder: Also known as an angle grinder or disc grinder, it is mainly used for grinding steel, metal and stone. Commonly used grinding disc diameters are 100mm, 125mm, 180mm, 230mm.
7. Cutting machine: It is mainly used for cutting aluminum, wood, etc. at different angles. It is divided into metal material cutting machine and non-metal material cutting machine. When using, pay attention to the tightening of the saw blade and wear goggles.
8. Electric wrench and electric screwdriver: Both electric wrench and electric screwdriver are used to load and unload threaded connections. The transmission mechanism of the electric wrench consists of a planetary gear and an impact mechanism with a ball spiral groove. The electric screwdriver is equipped with a jaw clutch transmission mechanism or a gear transmission mechanism.
9. Concrete vibrator: Used to compact concrete when pouring concrete foundations and reinforced concrete elements. AmongIn these, the high frequency disturbing force of the direct connected electric vibrator is generated by the rotation of the eccentric block driven by the motor, and the motor is powered by an intermediate frequency power supply of 150Hz or 200Hz.
10. Electric planer: It is used for planing wood or wooden structural parts, and can also be used as a small tabletop planer when mounted on a stand. The cutting shaft of the electric planer is driven by the motor shaft through a belt.
11. Marble machine:
As a rule, stone is cut. You can choose dry or wet cutting. The following saw blades are commonly used: dry saw blade, wet saw blade and double saw blade for wet and dry cutting. Household is used for cutting wall and floor tiles.
What is a hardware tool
Tooling includes iron, steel, aluminum, and other metallic materials that are processed into various metallic components after physical processes such as quenching, rolling, and cutting. There are many types of hardware tools, according to our common points, there are 11 categories: hand tools, electric tools, hydraulic tools, pneumatic tools, diamond tools, measuring tools, welding tools, cutting tools, lifting tools, explosion-proof tools. and means of labor protection.
Hardware classification
Specific classification and characteristics of various hardware tools Hand tools Hand tools are divided into screwdrivers, wrenches, hammers, tape measures, wallpaper knives, electrical knives, hacksaws, etc.
Power tools01
Refers to a tool that is held and operated by hand, powered by a low-power motor or electromagnet, and driven by a transmission mechanism to drive the working head.
1. Electric drill: A tool used for drilling metal materials, plastics, etc. When equipped with forward and reverse switches and electronic speed control devices, it can be used as an electric screwdriver. Some models come with a rechargeable battery.
2. Electric hammer: used for drilling masonry, concrete, artificial or natural stone, etc., and the functions of electric drills are interchangeable. SDS-PLUS chucks and drills are widely used for light drills, and SDS-MAX chucks and drills are used for medium and heavy rock drills, and the chisels can be clamped.
3. Impact Drill: An electric tool primarily used for drilling hard materials such as masonry and concrete. When the impact mechanism is closed, it can also be used as a conventional electric drill.
4. Grinder: A tool for grinding with a grinding wheel or grinding wheel, used for grinding wood. There are straight electric grinders and electric angle grinders. Sandpaper required.
5. Curve Saw: Mainly used for cutting steel, wood, plastic and other materials, the saw blade reciprocates or swings up and down and is most suitable for cutting precise straight lines or curves.
6. Angle grinder: Also known as an angle grinder or disc grinder, it is mainly used for grinding steel, metal and stone. Commonly used grinding disc diameters are 100mm, 125mm, 180mm, 230mm.
7. Cutting machine: It is mainly used for cutting aluminum, wood, etc. at different angles. It is divided into metal material cutting machine and non-metal material cutting machine. When using, pay attention to the tightening of the saw blade and wear goggles.
8. Electric wrench and electric screwdriver: Both electric wrench and electric screwdriver are used to load and unload threaded connections. The transmission mechanism of the electric wrench consists of a planetary gear and an impact mechanism with a ball spiral groove. The electric screwdriver is equipped with a jaw clutch transmission mechanism or a gear transmission mechanism.
9. Concrete Vibrator: Used to compact concrete when pouring concrete fundaments and reinforced concrete elements. Among them, the high-frequency disturbing force of the direct-connected electric vibrator is generated by the rotation of the eccentric block driven by the motor, and the motor is powered by a 150Hz or 200Hz intermediate frequency power supply.
10. Electric planer: It is used for planing wood or wooden structural parts, and can also be used as a small tabletop planer when mounted on a stand. The cutting shaft of the electric planer is driven by the motor shaft through a belt.
11. Marble machine:
As a rule, stone is cut. You can choose dry or wet cutting. The following saw blades are commonly used: dry saw blade, wet saw blade and double saw blade for wet and dry cutting. Household is used for cutting wall and floor tiles.
Pneumatic tools02
A tool that uses compressed air to drive an air motor to output kinetic energy to the outside. It features a compact body and high security.
1. Jackhammer: Also known as a pneumatic wrench, this is an efficient and safe tool for removing and installing screws.
2. Pneumatic screwdriver: Pneumatic tools for tightening and loosening screws and nuts. Screwdrivers are powered by compressed air and are widely used in the manufacturing industry.
3. Pneumatic Sander: This is a sander that provides pneumatic power to keep the machine running continuously by connecting an air pump. It is suitable for surface grinding of iron plates, wood, plastic and tires.
4. Pneumatic Spray Gun: Use compressed air to atomize the liquid material, so that the size of the liquid particles will be different under a certain air pressure.
In addition, there are pneumatic nail guns, pneumatic sanders, pneumatic spray guns, pneumatic belt sanders, pneumatic grinders, pneumatic polishers, pneumatic angle grinders, engraving grinders, engraving pens, pneumatic files, pneumatic drills, pneumatic shovels, pneumatic hammer, pneumatic threading machine, pneumatic threading machine, etc.
03Diamond tools
Abrasives are tools used for grinding, grinding and polishing, such as grinding wheels, rollers, rollers, cutting wheels, grinding discs, grinding wheels, soft grinding discs, etc.
A cutting process in which a saw blade separates a workpiece or material, such as circular saws, gang saws, wire saws, barrel saws, band saws, chain saws, wire saws, etc.
Drilling tools are tools used to develop natural resources underground or on the seabed, such as geometallurgical drill bits, oil (gas) well drill bits, engineering thin wall drill bits, rock drill bits, etc.</ p>
What is a hardware tool
Tooling includes iron, steel, aluminum, and other metallic materials that are processed into various metallic components after physical processes such as quenching, rolling, and cutting. There are many types of hardware tools, according to our common points, there are 11 categories: hand tools, electric tools, hydraulic tools, pneumatic tools, diamond tools, measuring tools, welding tools, cutting tools, lifting tools, explosion-proof tools. and means of labor protection.
Hardware classification
Specific classification and characteristics of various hardware tools Hand tools Hand tools are divided into screwdrivers, wrenches, hammers, tape measures, wallpaper knives, electrical knives, hacksaws, etc.
Power tools01
Refers to a tool that is held and operated by hand, powered by a low-power motor or electromagnet, and driven by a transmission mechanism to drive the working head.
1. Electric drill: A tool used for drilling metal materials, plastics, etc. When equipped with forward and reverse switches and electronic speed control devices, it can be used as an electric screwdriver. Some models come with a rechargeable battery.
2. Electric hammer: used for drilling masonry, concrete, artificial or natural stone, etc., and the functions of electric drills are interchangeable. SDS-PLUS chucks and drills are widely used for light drills, and SDS-MAX chucks and drills are used for medium and heavy rock drills, and the chisels can be clamped.
3. Impact Drill: An electric tool primarily used for drilling hard materials such as masonry and concrete. When the impact mechanism is closed, it can also be used as a conventional electric drill.
4. Grinder: A tool for grinding with a grinding wheel or grinding wheel, used for grinding wood. There are straight electric grinders and electric angle grinders. Sandpaper required.
5. Curve Saw: Mainly used for cutting steel, wood, plastic and other materials, the saw blade reciprocates or swings up and down and is most suitable for cutting precise straight lines or curves.
6. Angle grinder: Also known as an angle grinder or disc grinder, it is mainly used for grinding steel, metal and stone. Commonly used grinding disc diameters are 100mm, 125mm, 180mm, 230mm.
7. Cutting machine: It is mainly used for cutting aluminum, wood, etc. at different angles. It is divided into metal material cutting machine and non-metal material cutting machine. When using, pay attention to the tightening of the saw blade and wear goggles.
8. Electric wrench and electric screwdriver: Both electric wrench and electric screwdriver are used to load and unload threaded connections. The transmission mechanism of the electric wrench consists of a planetary gear and an impact mechanism with a ball spiral groove. The electric screwdriver is equipped with a jaw clutch transmission mechanism or a gear transmission mechanism.
9. Concrete Vibrator: Used to compact concrete when pouring concrete fundaments and reinforced concrete elements. Among them, the high-frequency disturbing force of the direct-connected electric vibrator is generated by the rotation of the eccentric block driven by the motor, and the motor is powered by a 150Hz or 200Hz intermediate frequency power supply.
10. Electric planer: It is used for planing wood or wooden structural parts, and can also be used as a small tabletop planer when mounted on a stand. The cutting shaft of the electric planer is driven by the motor shaft through a belt.
11. Marble machine:
As a rule, stone is cut. You can choose dry or wet cutting. The following saw blades are commonly used: dry saw blade, wet saw blade and double saw blade for wet and dry cutting. Household is used for cutting wall and floor tiles.
Pneumatic tools02
A tool that uses compressed air to drive an air motor to output kinetic energy to the outside. It features a compact body and high security.
1. Jackhammer: Also known as a pneumatic wrench, this is an efficient and safe tool for removing and installing screws.
2. Pneumatic screwdriver: Pneumatic tools for tightening and loosening screws and nuts. Screwdrivers are powered by compressed air and are widely used in the manufacturing industry.
3. Pneumatic Sander: This is a sander that provides pneumatic power to keep the machine running continuously by connecting an air pump. It is suitable for surface grinding of iron plates, wood, plastic and tires.
4. Pneumatic Spray Gun: Use compressed air to atomize the liquid material, so that the size of the liquid particles will be different under a certain air pressure.
In addition, there are pneumatic nail guns, pneumatic sanders, pneumatic spray guns, pneumatic belt sanders, pneumatic grinders, pneumatic polishers, pneumatic angle grinders, engraving grinders, engraving pens, pneumatic files, pneumatic drills, pneumatic shovels, pneumatic hammer, pneumatic threading machine, pneumatic threading machine, etc.
03Diamond tools
Abrasives are tools used for grinding, grinding and polishing, such as grinding wheels, rollers, rollers, cutting wheels, grinding discs, grinding wheels, soft grinding discs, etc.
A cutting process in which a saw blade separates a workpiece or material, such as circular saws, gang saws, wire saws, barrel saws, band saws, chain saws, wire saws, etc.
Drilling tools are tools used to develop natural resources underground or on the seabed, such as geometallurgical drill bits, oil (gas) well drill bits, engineering thin wall drill bits, rock drill bits, etc.
Tools for measuring04
1.Length measurement tool A tool that compares the measured length with a known length to obtain a measurement result is called a measurement tool. Length measurement tools include gauges, gauges, and gauges.
Temperature measurement instruments Instruments used to measure temperature usually include mercury thermometers, kerosene thermometers, thermistors, thermocouples, bimetal thermometers, infrared thermometers, hygrometers, liquid thermometers, etc.
Time measurement tools require different accuracy of time measurementname for different occasions and purposes. For example, electronic stopwatches are used in complex sports competitions, while time in scientific experiments is measured in microseconds or smaller units. The measurement tools used are even more specific. .
2. Quality measurement instruments According to the measurement of small, medium and large goods in daily life and the needs of the laboratory, object quality measurement instruments can be divided into platform scales, electronic scales, dead weight scales, pallet scales, physical scales, etc.
3. Electrician's Measuring Tools Typically, experienced electricians will use measuring tools, including electroscope pens, multimeters, clamp meters, and shakers, while weak electricians will use oscilloscopes, graphing instruments, logic knobs, etc.
4. Horizontal Angle Measuring Tool A spirit level is a measuring tool commonly used to measure small angles. A level is a tool for measuring the height difference between two points on the ground. Measurement of horizontal and vertical angles.
Welding tools05
1. Soldering irons Soldering irons can be divided into low temperature soldering irons, high temperature soldering irons and constant temperature soldering irons. They can be used to weld thin metal objects and are often used in installation, maintenance and repair. a small amount of production work on electronic assemblies.
2. Solder mainly includes three categories: solder wire, solder rod and solder paste. Applicable to all kinds of electronic soldering, suitable for hand soldering, wave soldering, reflow soldering and other processes.
3. A tin furnace is a temperature controlled oven or vessel. The socket is used for tinning the wire and tin on the tip of the soldering iron. The tin furnace is especially useful for small-scale jobs that require reliable temperature control.
4. Flux is a chemical that can promote and promote the welding process in the welding process, and at the same time has a protective effect and prevents oxidation reactions. Common fluxes include water-soluble fluxes, unrefined fluxes, and rosin-based fluxes.
5. A hot air gun uses hot air blown from the resistance heating wire core to solder and grip components. Digital temperature display heat guns and high temperature heat guns are common.
06Lifting tools
1. Jack: Widely used in lifting work, it can lift very heavy mechanical equipment with little effort, and correct equipment installation deviations and component deformation.
2. The clamp is used to connect between a rope buckle (jacking rope, steel cable) and a rope buckle or a rope buckle and a compound ring. It is a widely used connecting tool inlifting operations.
3. Inverted chain is also called manual chain hoist, which can be used for lifting light components, tensioning wind tower ropes, and tensioning tied ropes during transportation of components or equipment.
4. The rope clamp is mainly used to temporarily connect the rope, fix the rear hand rope when the rope passes around the pulley, and fix the head of the wind rope to the pole.
5. The winch mill is a widely used human traction tool, which is mainly used for construction work in remote areas where the lifting speed is low, there is no electric winch, no power supply, and the traction is small.
Occupational safety equipment05
1. Safety helmets are used for head protection and protection against impacts and extrusion. These are mainly plastic, rubber, glass, adhesive safety helmets, safety helmets made of bamboo and rattan.
2. Safety glasses are used to protect the eyes and face of workers from external damage. It is divided into electric welding helmets, oven goggles, shockproof goggles, microwave oven safety devices, etc.
3. Soundproof earplugs can be inserted into the ear canal. They are made of foam resin or rubber materials. As a rule, these are disposable products. When reusing, pay attention to industrial hygiene issues.
4. Industrial protective masks are suitable for industries such as coal mining, mining and other industrial and mining enterprises. It can only effectively block dust, but it does not protect against viruses and bacteria very well.
5. Work protection gloves are used for hand protection, mainly acid and alkali resistant gloves, electrical insulation gloves, welding gloves, X-ray resistant gloves, asbestos gloves, etc.
In addition, there are safety shoes, protective clothing, seat belts, harnesses, safety ropes, safety nets, respiratory protection, etc.