One. Socket wrench for spark plug:
Special tool for manual disassembly and assembly of spark plugs. When used, spark plug heads with different heights and radial dimensions are selected according to the mounting position of the spark plug and the size of the spark plug hex. When disassembling the spark plug, the spark plug bushing must be installed and then rotated to prevent the bushing from slipping. When turning the spark plug bushing, do not extend the handle as desired, so as not to damage the bushing.

2. Piston ring pliers:
Piston ring loading and unloading pliers are used to load and unload engine piston rings to prevent piston ring breakage due to uneven force. When using, clamp the piston ring loading and unloading pliers into the piston ring hole, hold the handle lightly, squeeze slowly, and the piston ring will slowly open, and place the piston ring into the piston ring groove or remove it from it. .

3. Jackhammer:
A pneumatic tool, so named because it makes a cannon sound, also known as a pneumatic wrench, when it works. Its power source is the compressed air coming out of the air compressor. When the compressed air enters the cylinder of the air gun, it drives the impeller inside to generate rotational force to remove the screws from the tires. It is the fastest screw removal tool.

Fourth. Device for diagnosing car malfunctions:
When a fault occurs in the vehicle's system, the fault indicator will illuminate and the control module stores the fault information in memory. The fault code can be read from the car computer using a diagnostic tool, and its meaning According to the fault code prompt, service personnel can quickly and pinpoint the cause and location of the problem.

5. Wheel alignment:
It is used to determine the vehicle's camber parameters and compare them with those of the original design, to help the user adjust the camber parameters appropriately to achieve the vehicle's ideal driving performance, i.e., easy handling, stable and reliable driving, reduced tire deflection, wear, etc.

Six. Jack:
A light and small lifting device that uses a rigid lifting part as a working device to lift heavy objects within the small travel of the top bracket or bottom claw. It is often used to jack up the car body to make changing tires easier.

Seven. Tire changer:
Also called tire changer and tire changer, it is used to install and unload car tires, and can also change tires for various vehicles such as cars, motorcycles and heavy trucks. It is a necessary equipment for auto repair factories and 4S shops.
Eight. Rise:
Car lift refers to car maintenance equipment used to lift cars in the car maintenance industry. The lift plays a vital role in car maintenance, whether it is a car overhaul or minor repairs, it is inseparable from it.