Pliers are hand tools used for clamping and holding workpieces, and for twisting, bending, and cutting wire. The shape of the pliers is V-shaped and usually consists of three parts: the handle, the jaws of the pliers, and the mouth of the pliers.Pliers | vise | pliers | universal pliers
It is commonly used for pressing hard metal products such as steel wire and nails, and can also play the role of clamping and fixing.
Needle nose pliers | Needle nose pliers | Needle nose pliers | Pliers with thin jaws
Due to the design of the tip, it is typically used for cutting and holding relatively small metal objects.
Diagonal pliers | Diagonal pliers
Commonly used for cutting hard materials such as steel wire, iron mesh, wire, etc.
It is generally used for cutting relatively soft materials such as plastic, soft wire, printed circuit boards, network cables, aluminum foil, etc. It cannot be used for cutting steel wire.
The pliers are so named because of their shape, reminiscent of a carp. Its peculiarity is that the width of the opening of the jaws has two adjustment positions, which can be increased or decreased for use. It is mainly used for clamping round parts, and it can also change small nuts and small bolts with a wrench. The back edge of the jaw can be used to cut metal wires, and it is widely used in the auto repair industry.
water pump pliers
The water pump wrench works like an adjustable wrench. But it is lighter, smaller and easier to use than a pipe wrench. It is generally more suitable for household non-professional emergencies or simple plumbing installations. Of course, the clamping force is not as good as a pipe wrench.
Wire stripping tools are one of the tools commonly used by electricians, motor and instrumentation repairmen. They are used by electricians to strip the surface layer of insulation from wire heads. The wire stripper can separate the cut wire insulation from the wire, and can also prevent electric shock.Pliers
Lightweight pliers, the English name for locking pliers, are mainly used for clamping workpieces in riveting, welding, grinding, etc. They are loosened, and the jaw has many adjustment positions to clamp workpieces of different thicknesses, and can also be used as a wrench .pliers
It is typically used to punch holes in paper or cardboard, and there are usually several hole sizes to choose from.Bent nose pliers
Similar to needle nose pliers (no cutting edge), suitable for use in narrow or recessed workspaces.Pliers
The jaw usually does not have a prismatic tooth pattern, which is mainly used to bend metal sheets and metal filaments into the desired shape. In repair work, it is used to install and pull pins, springs, etc. It is a tool commonly used in the assembly of metal parts and in telecommunications.Round nose pliers
The head of the pliers is conical, suitable for bending metal sheets and wire into a circle.Bolt cutters
A bolt cutter is a tool used to cut wires. Bolt cutters are tools used to cut thicker wires. Generally, there are insulating handle bolt cutters and iron handle bolt cutters, as well as pipe handle bolt cutters. Bolt cutters are commonly used to cut wires and cables and their specifications are given in full length.Retaining ring pliers
The circlip pliers are a special tool for installing inner and outer circlips. In appearance, they belong to the category of needle nose pliers. Plier heads can be straight on the inside, straight on the outside, curved on the inside, or curved on the outside.Bench vise
A bench vise, also known as a vise, is a general purpose fixture used for clamping workpieces. Mounted on a workbench, it is used to clamp and stabilize the workpiece. It is an indispensable tool in the locksmith shop. The turntable pliers can be rotated to turn the workpiece to a suitable working position.Cable clip
Cable clamps are commonly used for cutting or stripping cables.pipe wrench
A tool used to fasten or loosen fittings when joining iron pipes and fittings.
Chain pipe wrench