Analysis of the practical operation process and precautions for manual flame cutting

Welding personnel must have certain flame cutting skills in addition to basic welding, mainly manual flame cutting skills, which are used to assemble and size or repair workpieces. The oxyfuel cutting process goes through three p...

How to connect PE-X pipes for underfloor heating?

How to connect PE-X pipes for underfloor heating?

The vast majority of PE-X pipes use mechanical copper fittings. According to the structure of copper pipe fittings, they can be divided into nut fittings, clamp fittings and expansion push fittings. 1 fitting with nut The ferrul...

What tile tools are there ?

What tile tools are there ?

Tile is a very common finishing material in decorating. There are many small details to pay attention to when laying tiles. For beginners in decorating, this will double the result for half the effort of preparing the tools requir...

What is the difference between a power tool and an air tool?

What is the difference between a power tool and an air tool?

Introduction to power tools Power tools are tools that are held and operated by hand, powered by a low power motor or electromagnet, and powered by a transmission mechanism to drive the work head. Advantages: Power tools have th...

List of Hand Pallet Truck Faults

List of Hand Pallet Truck Faults

Hand pallet truck is also known as cattle chopping forklift. It is not uncommon for a small malfunction to occur while using the truck, and many people have asked for solutions using knowledge and forums. In fact, the malfunction ...

How to protect the handle from rust?

How to protect the handle from rust?

We know that a car for transportation needs regular maintenance, a wooden floor in a house needs to be cleaned and waxed, a watch on your wrist needs to be cleaned and oiled, and luxury bags also need to be oiled and dented. What ...

The evolution of screws and screwdrivers

The evolution of screws and screwdrivers

A screw is any rod that has a corkscrew groove in its surface. Screws are used to hold two objects together. A screwdriver is a tool that turns (turns) a screw; A screwdriver has a point that fits over the head of a screw. Early ...

How to use handheld welding tools and precautions

How to use handheld welding tools and precautions

The main hand soldering tools are electric soldering iron, heat gun, tin melting furnace, etc., which are shown below. Soldering iron 1. Types of soldering irons The soldering iron is the most commonly used tool for manual solder...

Wire Cutting Machine Wire Cutting Machine Stone Cutting Machine Stone Cutting Equipment

Pailen Machinery Consulting Company: 150-6922-8673 Technical parameters of the wire saw: cm02 Model 36 and 65 kW Main motor power 36 kW/50 Hz Wire saw speed range 0–40 m/s Travel speed 0-80 m/h Power head rotates 360° Step guide 2...

Introduction, Applications and Safety Issues of Handheld Woodworking Sanding Machine

Introduction, Applications and Safety Issues of Handheld Woodworking Sanding Machine

The key to running a polishing machine is to achieve maximum polishing speed in order to remove the layer of damage created during polishing as quickly as possible. At the same time, care must be taken to ensure that the layer of ...