In order to prolong the life of the cementing machine and ensure its performance, we need to clean and maintain the cementing machine after use, so how do we do that?
There are two ways to clean up:
After the completion of grouting, immediately move the two grouting pipes to the clean water tank to clean up the remaining grout in the grouting machine to prevent the grout from hardening over time and increase unnecessary hassle. After cleaning the working cylinder and the inlet and outlet valve body, the slurry suction pipe should be taken out of the water, continue the operation of the machine, drain the remaining pulp from the working cylinder and the inlet and outlet valve body, and then turn off the power.
After using the grout machine, use thinner, banana water and thinner to clean the remaining material inside. The cleaning process is to close the pressure switch valve on the high pressure pipe, pour 200 ml of solvent into the cleaning agent. agent and delete. Turn the electric button on the cementing machine, raise the pressure to 300-400, open the safety valve, and spray the cleaned slag into the waste barrel. Then repeat 3-5 times. Remember to protect your eyes and hands when using this method.
Maintenance of the cementing machine
For cementing machines that will no longer be used in the near future, the intake and exhaust valve bodies and slave cylinders should be disassembled and cleaned. When disassembling, first remove the intake and exhaust valve body, then unscrew the two nuts on the threaded rod at the end of the working cylinder, and then remove the cylinder head and cylinder liner. Then lubricate with anti-corrosion liquid or grease, and then assemble it for later use.
