Heating plate
The heating plate plays a leading role in the painting and calligraphy installation, so it must be kept clean, it is strictly forbidden to collide with hard objects. If there is dirt or film pasted, wipe it with a cloth soaked in alcohol, can also be wiped with the car turned on.
Felt
The felt is laid flat on the two-layer rubber sponge and must be kept clean so as not to affect the installation effect and efficiency.
Axis connection
When using a new machine, there will be a friction sound on the lock shaft. Moisten the shaft with engine oil and press the knob a few times and the sound will disappear.
Pressure
When the pressure of the machine is not enough, you can change the elastic sponge or adjust the bolt.
Indicator light
The indicator light is divided into a heating indicator and a power indicator. After the power is turned on, both indicators light up at the same time. During use, the heating indicator automatically adjusts the need for heating depending on the size of the heat, but this does not affect normal operation.
Temperature control
The normal temperature range is 75-8 C. You can directly adjust the temperature to this temperature and then turn on the power.
On Off
It should be noted here that the switch of the machine and the switch of the small iron are integrated together, so that it is not easy to be careless when turning off. The machine can work all day, but for safety reasons, it should be kept away from the machine, such as not turning off the power for a long time.