After construction on the construction site, excavators and loaders splashed with cement, how to clean it up?

After construction on the construction site, excavators and loaders splashed with cement, how to clean it up?

Backhoes and loaders often appear at various construction sites, and job sites tend to be poor. After a working day, a lot of dust, dirt, etc. will remain on the fuselage. What to do if you accidentally spill cement on your excavator or loader? Is there an easy way to remove the cement? In order not to cause headaches for car owners, here are four ways to deal with it.

After construction on the construction site, excavators and loaders splashed with cement, how to clean it up?

1. First of all, a method with a relatively slow cleaning speed. Wet and dampen with water first, then use car wash liquid, wool gloves or towels for a slow clean. This method is a little slow, but slow and delicate. Finally, after cleaning, use a polishing machine to deal with the scratches.

After construction on the construction site, excavators and loaders splashed with cement, how to clean it up?

2. Buy a special cement cleaner online or in a store, simply spray it on the surface of the cement to be removed, wait for a while until the cement decomposes into a white foam, and then rinse off the cement. Wipe clean after removal.

After construction on the construction site, excavators and loaders splashed with cement, how to clean it up?

3. Some people do not want to buy cleaning fluid, how to deal with cement on the fuselage? You can take a bottle of vinegar at home, cement is alkaline, you can choose a weak acid to neutralize. Neutralize the fuselage cement with vinegar, then wash it with water, and finally wash the fuselage with a high pressure water gun, but remind everyone to dilute the vinegar with water, otherwise it will damage the fuselage.

After construction on the construction site, excavators and loaders splashed with cement, how to clean it up?

4. The latter method is still the weak acid neutralization principle described above. You can buy 0.2 kg of hydrochloric acid, add 1 kg of water to dilute it, and then use a toothbrush to apply it to the cement. After 1 minute, the cement starts to decompose, and finally wipe it with a towel soaked in water. . However, more attention should be paid to the speed of operation, and the hydrochloric acid water should not be left on the fuselage for too long, otherwise it will damage the car's paint.

After construction on the construction site, excavators and loaders splashed with cement, how to clean it up?

Summary: The above is a summary of four ways to deal with fuselage cement. Of course, some users use toilet cleaner, washing powder, etc. Finally, I would like to remind everyone that when the excavator is stained with cement, it is better to remove it as quickly as possible, the longer the time, the more difficult it is to deal with it. I don't know if you have encountered a similar situation, and how to deal with it?