Proper use of the KG-16 portable baler can be done as follows
1. The portable baler seems like a simple packing tool, but there are many more things to pay attention to during use. If you use this KG-16 portable baler as needed, it can serve you 3 - 5 years no problem.
2. The portable packaging machine is divided into 2 parts for maintenance (host: motor / circuit board) (wear parts: tension wheel / anti-skid sheet / vibrator / friction sheet / cutter / battery, these 6 parts are usually used wear parts), no problem within 1 -2 years of normal use, and it will be disposed of after 2-3 months of abnormal use.
Component: motor/circuit board. What you should pay attention to:
1. Packing machine motor: This is the main component of the whole packing machine, one machine has two motors, the normal use of the tightening force of our KG-16 (280kg) electric packing machine, please do not overload our packing machine. effectively protect the life of the engine.
2. Packaging machine circuit board: This is the named control and monitoring unit in the packaging machine. Please do not enter the water to prevent short circuit and burnout of the circuit board.
Vulnerable parts: idler/sliding plate/vibrator/friction plate/knife/battery:
1. Idler pulley / anti-skid plate / vibrator / friction plate / cutter these 5 parts, you only need to remember one thing, never (blank perforation, that is, when the packing tape is not lifted into the air - a time machine) This can effectively extend the life of these five components .
2. Packing machine battery: After receiving the new machine, please charge the remaining charge (discharged) in the battery first. The new battery should be charged normally after the first three charging cycles (5 hours) three times. Four charging times can be fully charged according to the normal charging time of about 45-60 minutes. Please ensure that the battery is charged every time (the battery is discharged and then recharged), which can prolong battery life.